David Drummond
Member
We ran the new update today also and noted no problems!
-
After witnessing the continued decrease of involvement in the SpotterNetwork staff in serving SN members with troubleshooting issues recently, I have unilaterally decided to terminate the relationship between SpotterNetwork's support and Stormtrack. I have witnessed multiple users unable to receive support weeks after initiating help threads on the forum. I find this lack of response from SpotterNetwork officials disappointing and a failure to hold up their end of the agreement that was made years ago, before I took over management of this site. In my opinion, having Stormtrack users sit and wait for so long to receive help on SpotterNetwork issues on the Stormtrack forums reflects poorly not only on SpotterNetwork, but on Stormtrack and (by association) me as well. Since the issue has not been satisfactorily addressed, I no longer wish for the Stormtrack forum to be associated with SpotterNetwork.
I apologize to those who continue to have issues with the service and continue to see their issues left unaddressed. Please understand that the connection between ST and SN was put in place long before I had any say over it. But now that I am the "captain of this ship," it is within my right (nay, duty) to make adjustments as I see necessary. Ending this relationship is such an adjustment.
For those who continue to need help, I recommend navigating a web browswer to SpotterNetwork's About page, and seeking the individuals listed on that page for all further inquiries about SpotterNetwork.
From this moment forward, the SpotterNetwork sub-forum has been hidden/deleted and there will be no assurance that any SpotterNetwork issues brought up in any of Stormtrack's other sub-forums will be addressed. Do not rely on Stormtrack for help with SpotterNetwork issues.
Sincerely, Jeff D.
MobileThreatNet UPDATE RELEASED!!!!
- Thread starter Travis Carlson
- Start date
Robert Rohloff
EF3
Is there any reason that I should not have the radar, strikes, winds ect go to blue buttons? I run the aviator pkg and have deleted and reinstalled several times and can not get these buttons to change and activate.
Hank Baker
EF1
- Joined
- Feb 25, 2006
- Messages
- 66
You have to have the responder package.
Gaetan Cormier
EF3
Hello all!
Since WxWorx was not really usable in Canada, I never really looked into this but now I come accross this discussion and notice all the new Canadian updates on the new version... so to this mean that WxWorx is now totally usable in Canada with Canadian radars?
That is totally great! Altough I read on wxworx website that XMWX is in US only, is this going to change now since Canadian data can be processed?
Cheers!
Since WxWorx was not really usable in Canada, I never really looked into this but now I come accross this discussion and notice all the new Canadian updates on the new version... so to this mean that WxWorx is now totally usable in Canada with Canadian radars?
That is totally great! Altough I read on wxworx website that XMWX is in US only, is this going to change now since Canadian data can be processed?
Cheers!
JF Massicotte
EF3
Ask this question to XM Canada...
I am waiting for them to start the service too... Damn CRTC.
I am waiting for them to start the service too... Damn CRTC.
Doug Raflik
EF3
So is it safe to download the new update or are there still problems to be worked out?
Doug Raflik
[email protected]
Doug Raflik
[email protected]
David Drummond
Member
I think your safe, I haven't experienced ANY further problems since the new update.
Brett Adair
EF5
Anyone had any trouble with there topo background after updating to the new version? My background has went back to the grey on me......
J Kinkaid
Brett Adair
EF5
Doing a clean install? You mean install over the 1.35a version? Everything was working until I installed that.
Randy Denzer
EF2
I lost my topo because I had not upgraded the previous downloads 1.31 patch, 1.31 update, and the 1.33 update. After having these problems I contacted WxWorks and they explained that I needed to do an unistall and delete all the folders. I then did the basic clean install with the original disk. After that I went to the download page (http://www.wxworx.com/ground/download_updates.php) and started at the bottom up. I was told to load my mapping upgrade disk LAST.
This worked.
MESO has been using the new program now for a week or two and have not had a single problem or crash. I got great help from WxWorks tech support and I am very happy with the new data, except I wish they could change the colors of the boundries for the outlook percentages.
Hats off to WxWorks.
This worked.
MESO has been using the new program now for a week or two and have not had a single problem or crash. I got great help from WxWorks tech support and I am very happy with the new data, except I wish they could change the colors of the boundries for the outlook percentages.
Hats off to WxWorks.
Last edited by a moderator:
Robert Edmonds
EF5
I just downloaded it and currently running 1.35a. The only thing I see wrong is that the winds bar is staying gray. However, I do believe with the Master Mariner data package (which is what I have) this is suppose to be included in the data. Thus the bar should be blue or red. If I can't fix it so be it, I didn't use that feature much, but I just would like the upgrade not to be a downgrade...
Paul Knightley
EF5
This may be a silly question, but I've downloaded the 1.35 upgrade, and can see the new buttons on the side. However, I see no button for SPC Watches...is there such a button, or do the watches just appear, as long as you have the responder package? I'm only looking at the demo version, because I'm over in England and we don't have XM!
Thanks,
Paul.
Thanks,
Paul.
David Drummond
Member
It shows up when you have the warnings activated.
Paul Knightley
EF5
Ah, I see - many thanks David. I just wanted to check before we come over there in a couple of weeks' time!
Paul.
Paul.
