UCAR Solo II ???

[Blake Michaleski]

I'm having some trouble installing SoloII onto my linux machine. I'm fairly new to linux/unix. I need this to view about 5Gb of DORADE Sweep files (raw radar basically).

My trouble is after I envoke the configure file, I get massive errors when trying to make the executable file.

I think I need the earlier GTK+ librairies but i had a conflict on installing those.

Maybe someone in the research community could help out?

 

[Aaron Kennedy]

Do you have NETCDF installed? The make/install files need this for the installation to go smooth. If you don't thats ok too. Just search through the dozen of files or so and comment out the NETCDF lines.

You can do a find command for netcdf to make the search and replace opeartion go quicker!

(I had this issue when I installed the program)


Aaron

 

[Blake Michaleski]

say what?

I'm not at that machine now... but since you have installed solo II then you know what you are doing.

This might require some phonecalls. I'll try to get up with you when I can get to teh computer. its at the house and I dont have web there.


I'll try to install netcdf and then i'll let you know what's up.

Thanks bro.

 

[Blake Michaleski]

ok I got netCDF to install properly but this still did not let soloii install.

in teh soloii readme file, it states that the GTK+ 1.2 libaries are required.

I tried to install those but they need glib 1.2.8 installed.



I installed glib1.2.8 and then when i tried to install gtk+ 1.2.8 it gave me an error....

checking for glib-config... /usr/local/bin/glib-config
checking for GLIB - version >= 1.2.8... no
*** Could not run GLIB test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GLIB was incorrectly installed
*** or that you have moved GLIB since it was installed. In the latter case, you
*** may want to edit the glib-config script: /usr/local/bin/glib-config
configure: error:
*** GLIB 1.2.8 or better is required. The latest version of GLIB
*** is always available from ftp://ftp.gtk.org/.

glib 1.2.8 is installed and as far as I could tell it installed properly.

I can acess the glib-config file but i dont know exactly what to edit.

here is the glib-config file located at /usr/local/bin/glib-config

#!/bin/sh

prefix=/usr/local
exec_prefix=${prefix}
exec_prefix_set=no

usage()
{
cat <<EOF
Usage: glib-config [OPTIONS] [LIBRARIES]
Options:
[--prefix[=DIR]]
[--exec-prefix[=DIR]]
[--version]
[--libs]
[--cflags]
Libraries:
glib
gmodule
gthread
EOF
exit $1
}

if test $# -eq 0; then
usage 1 1>&2
fi

lib_glib=yes

while test $# -gt 0; do
case "$1" in
-*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) optarg= ;;
esac

case $1 in
--prefix=*)
prefix=$optarg
if test $exec_prefix_set = no ; then
exec_prefix=$optarg
fi
;;
--prefix)
echo_prefix=yes
;;
--exec-prefix=*)
exec_prefix=$optarg
exec_prefix_set=yes
;;
--exec-prefix)
echo_exec_prefix=yes
;;
--version)
echo 1.2.8
exit 0
;;
--cflags)
if test "${prefix}/include" != /usr/include ; then
includes="-I${prefix}/include"
fi
echo_cflags=yes
;;
--libs)
echo_libs=yes
;;
glib)
lib_glib=yes
;;
gmodule)
lib_gmodule=yes
;;
gthread)
lib_gthread=yes
;;
*)
usage 1 1>&2
;;
esac
shift
done

if test "$echo_prefix" = "yes"; then
echo $prefix
fi
if test "$echo_exec_prefix" = "yes"; then
echo $exec_prefix
fi
if test "$echo_cflags" = "yes"; then
cflags=""
if test "$lib_gthread" = "yes"; then
cflags="$cflags -D_REENTRANT"
fi
echo -I${exec_prefix}/lib/glib/include $includes $cflags
fi
if test "$echo_libs" = "yes"; then
libsp=""
libsa=""
if test "$lib_glib" = "yes"; then
libsp="$libsp -lglib"
fi
if test "$lib_gthread" = "yes"; then
libsp="-lgthread $libsp"
libsa="$libsa -lpthread"
fi
if test "$lib_gmodule" = "yes"; then
libsp="-rdynamic -lgmodule $libsp"
libsa="$libsa -ldl"
fi
echo -L${exec_prefix}/lib $libsp $libsa
fi

 

[Aaron Kennedy]

Nothing is standing out at me.... it could still be the netcdf references in soloii (we had netcdf installed and it still didn't work).

Don't ya just love the cain-o-installs

Aaron

 

[Blake Michaleski]

ha this is killing me!

I did have one development in this though... There was an error in the untarring of the GLIB that I wasnt catching so we'll see once I get that installed.

 

[Blake Michaleski]

TTT


Well I have changed over to SuSe 10.0 Linux. It already has the GTK 1.2 toolkit installed as well as teh GLIB1.2 libraries. I'm slowly but surely turning into a Unix/linux geek but I still cant get solo II to install. I really need it now since I now have a deadline for this paper we are writing.

I havent had a chance to try the netCDF libraries but it says I dont neccessarily need them in the soloII readme file.

 

[Aaron Kennedy]

So what does it do now when you install?

Aaron

 

[Eric Whitehill]

Originally posted by Blake Michaleski
TTT


Well I have changed over to SuSe 10.0 Linux. It already has the GTK 1.2 toolkit installed as well as teh GLIB1.2 libraries. I'm slowly but surely turning into a Unix/linux geek but I still cant get solo II to install. I really need it now since I now have a deadline for this paper we are writing.

I havent had a chance to try the netCDF libraries but it says I dont neccessarily need them in the soloII readme file.

Blake:

Try installing FreeBSD - the ports collection makes installing packages like GLib and GTK much easier.

With SuSe 10.0 you're going to run into the same problems as before.

If you have this machine on a publically accessable IP, let me know, and I can assist you with configuring it, as I'm a *nix/network engr. as my other life.

-Eric

 

[Blake Michaleski]

i'd rather keep suse 10.0. Apparently it will work with solo II. SuSe10.0 also already has glib and GTK+1.2 installed already.

I think it's a problem with things going into the correct directories.

the command line i'm using is straight out of the readme file.

after i untar (assuming i am doing it correctly) the file into the root folder, it's starts a directory tree with 'soloii110" from there i invoke the configure file as follows.

./configure --exec_prefix=/rdss --bindir=/rdss/bin

as per the readme file. then i type "make" and i get an error, let me try again and i'll get the exact error message.

 

[Blake Michaleski]

also which desktop environment is better or required to use SoloII? Gnome or KDE? I have KDE on now and I'm seeing a ton of /opt/gnome references in the configuration of soloII.

 

[Eric Whitehill]

Originally posted by Blake Michaleski
also which desktop environment is better or required to use SoloII? Gnome or KDE? I have KDE on now and I'm seeing a ton of /opt/gnome references in the configuration of soloII.

Since it's calling alot of GTK stuff, I'm personally more baised toawrds gnome.

-Eric

 

[Blake Michaleski]

that's what im afraid of. and since KDE is recommended for ex windows users i'm in a tight spot.

I'll give it a try but I really like KDE as a daily desktop environment

 

[Eric Whitehill]

Originally posted by Blake Michaleski
that's what im afraid of. and since KDE is recommended for ex windows users i'm in a tight spot.

I'll give it a try but I really like KDE as a daily desktop environment

If you have used KDE for a while, GNOME isn't that bad - you can do add ons with it to make it look more 'windows-y' if you want. I personally prefer gnome, but hey, whatever floats your boat.

Were you ever able to get a copy of the errors?

-Eric

 

[Blake Michaleski]

linux:/rdss/soloii110 # ./configure
uname is /bin/uname
checking for OS in Linux linux 2.6.13-15-default #1 Tue Sep 13 14:56:15 UTC 2005 i686 i686 i386 GNU/Linux... IT'S Linux
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... yes
checking for main in -lm... yes
checking for egrep... grep -E
checking whether gcc needs -traditional... no
checking whether byte ordering is bigendian... no
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking "for glib.h "... checking "for netcdf.h "... checking "for libnetcdf.a "... checking "for FORTRAN "... ./configure: line 4441: type: g77: not found
./configure: line 4443: type: f77: not found
WHICHFORTRAN:
FORTRAN NOT found!
/rdss/soloii110/translate
install is /usr/bin/install
/usr/bin/install

/bin/sh

GTKLIBS: -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -L/opt/gnome/lib -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
GTKINCLUDES: -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include
CC: gcc
CFLAGS: -g -O2
FCFLAGS: -g
LIBS: -lm -lncurses
FLIBS: -lm
LOCAL_INCLUDES: -I./ -I${SOLODIR}/include
DAPLIB:
WHICHFORTRAN:
LOCAL_DEFS: -DUNIX -DLITTLENDIAN
WHICH_SHELL: /bin/sh
WHICH_INSTALL: /rdss/soloii110/install-sh
FCSTATICFLAG:
REODORADE_LIBS:
SOLODIR: /rdss/soloii110
SOLOLIBDIR: ${LIBDIR}
SOLOBINDIR: ${BINDIR}
exec_prefix: NONE
libdir: ${exec_prefix}/lib
bindir: ${exec_prefix}/bin
ac_os_type: Linux
CFLAGS: -g

#### Ran configure in /rdss/soloii110 ####

configure: creating ./config.status
config.status: creating editor/Makefile
config.status: creating perusal/Makefile
config.status: creating translate/Makefile
config.status: creating Makefile
linux:/rdss/soloii110 # make
make clean
make[1]: Entering directory `/rdss/soloii110'
for d in translate editor perusal; do
(cd $d; make clean)
done
make[2]: Entering directory `/rdss/soloii110/translate'
rm -f core *.o *~ xltrsii ddex to_fb nx_reblock libs2.a
make[2]: Leaving directory `/rdss/soloii110/translate'
make[2]: Entering directory `/rdss/soloii110/editor'
rm -f core *.o *~ "" libsoloedit.a
make[2]: Leaving directory `/rdss/soloii110/editor'
make[2]: Entering directory `/rdss/soloii110/perusal'
rm -f core *.o *~ soloii ""
make[2]: Leaving directory `/rdss/soloii110/perusal'
make[1]: Leaving directory `/rdss/soloii110'
make install
make[1]: Entering directory `/rdss/soloii110'
for d in translate editor perusal; do
(cd $d; make all; make install)
done
make[2]: Entering directory `/rdss/soloii110/translate'
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c ddin.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c ddout.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_uf.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_ncdf.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c gneric_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c hrd_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c sigm_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c uf_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c nex_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c toga_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c elda_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c eldb_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c gpro_data.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c ground_echo.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c stdhrd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c xwsrqc.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c fof_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c piraq_dd.c
piraq_dd.c:6348:1: warning: "STARTGATE" redefined
piraq_dd.c:4688:1: warning: this is the location of the previous definition
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c tdwr_dd.c
tdwr_dd.c: In function ‘tdwr_nab_data’:
tdwr_dd.c:741: warning: pointer targets in assignment differ in signedness
tdwr_dd.c: In function ‘tdwr_nab_dataLE’:
tdwr_dd.c:886: warning: pointer targets in assignment differ in signedness
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c etl_dd.c
etl_dd.c: In function ‘etl_next_ray_mcaws’:
etl_dd.c:951: warning: pointer targets in assignment differ in signedness
etl_dd.c:1063: warning: pointer targets in assignment differ in signedness
etl_dd.c:1076: warning: pointer targets in assignment differ in signedness
etl_dd.c: In function ‘etl_nab_mom_data’:
etl_dd.c:1754: warning: pointer targets in assignment differ in signedness
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c cimm_dd.c
cimm_dd.c: In function ‘cimm_next_ray’:
cimm_dd.c:1362: warning: pointer targets in assignment differ in signedness
cimm_dd.c:1363: warning: pointer targets in assignment differ in signedness
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c nc_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c piraqx_dd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_files.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dda_common.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c ddb_common.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dorade_share.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_time.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c swp_file_acc.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_io_mgmt.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c by_products.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_catalog.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c gecho.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dorade_uf.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c product_x.c
product_x.c: In function ‘dd_product_x’:
product_x.c:78: warning: incompatible implicit declaration of built-in function ‘printf’
product_x.c:81: warning: incompatible implicit declaration of built-in function ‘printf’
product_x.c: In function ‘dd_px’:
product_x.c:130: warning: incompatible implicit declaration of built-in function ‘sprintf’
product_x.c:155: warning: incompatible implicit declaration of built-in function ‘sprintf’
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_der_flds.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c nssl_mrd.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_swp_files.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dorade_tape.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c shane.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_crackers.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dorade_ncdf.c
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c dd_swpfi.c
rm -f libs2.a
ar rsv libs2.a ddin.o ddout.o dd_uf.o dd_ncdf.o gneric_dd.o hrd_dd.o sigm_dd.o uf_dd.o nex_dd.o toga_dd.o elda_dd.o eldb_dd.o gpro_data.o ground_echo.o stdhrd.o xwsrqc.o fof_dd.o piraq_dd.o tdwr_dd.o etl_dd.o cimm_dd.o nc_dd.o piraqx_dd.o dd_files.o dda_common.o ddb_common.o dorade_share.o dd_time.o swp_file_acc.o dd_io_mgmt.o by_products.o dd_catalog.o gecho.o dorade_uf.o product_x.o dd_der_flds.o nssl_mrd.o dd_swp_files.o dorade_tape.o shane.o dd_crackers.o dorade_ncdf.o dd_swpfi.o
ar: creating libs2.a
a - ddin.o
a - ddout.o
a - dd_uf.o
a - dd_ncdf.o
a - gneric_dd.o
a - hrd_dd.o
a - sigm_dd.o
a - uf_dd.o
a - nex_dd.o
a - toga_dd.o
a - elda_dd.o
a - eldb_dd.o
a - gpro_data.o
a - ground_echo.o
a - stdhrd.o
a - xwsrqc.o
a - fof_dd.o
a - piraq_dd.o
a - tdwr_dd.o
a - etl_dd.o
a - cimm_dd.o
a - nc_dd.o
a - piraqx_dd.o
a - dd_files.o
a - dda_common.o
a - ddb_common.o
a - dorade_share.o
a - dd_time.o
a - swp_file_acc.o
a - dd_io_mgmt.o
a - by_products.o
a - dd_catalog.o
a - gecho.o
a - dorade_uf.o
a - product_x.o
a - dd_der_flds.o
a - nssl_mrd.o
a - dd_swp_files.o
a - dorade_tape.o
a - shane.o
a - dd_crackers.o
a - dorade_ncdf.o
a - dd_swpfi.o
gcc -g -I/usr/X11R6/include -DUNIX -DLITTLENDIAN -I./ -I/rdss/soloii110/include -c ddmain.c
rm -f xltrsii
gcc -g -o xltrsii ddmain.o libs2.a -lm -lncurses
/usr/lib/gcc/i586-suse-linux/4.0.2/../../../../i586-suse-linux/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
make[2]: *** [xltrsii] Error 1
make[2]: Leaving directory `/rdss/soloii110/translate'
make[2]: Entering directory `/rdss/soloii110/translate'
rm -f xltrsii
gcc -g -o xltrsii ddmain.o libs2.a -lm -lncurses
/usr/lib/gcc/i586-suse-linux/4.0.2/../../../../i586-suse-linux/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
make[2]: *** [xltrsii] Error 1
make[2]: Leaving directory `/rdss/soloii110/translate'
make[2]: Entering directory `/rdss/soloii110/editor'
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_bnd.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_wgt_stf.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_catch_all.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_utils.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_for_each.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_defrkl.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_histog.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_flag_ops.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_add_mult.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_proc_data.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c se_BB_unfold.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sxm_examine.c
rm -f libsoloedit.a
ar rsv libsoloedit.a se_bnd.o se_wgt_stf.o se_catch_all.o se_utils.o se_for_each.o se_defrkl.o se_histog.o se_flag_ops.o se_add_mult.o se_proc_data.o se_BB_unfold.o sxm_examine.o
ar: creating libsoloedit.a
a - se_bnd.o
a - se_wgt_stf.o
a - se_catch_all.o
a - se_utils.o
a - se_for_each.o
a - se_defrkl.o
a - se_histog.o
a - se_flag_ops.o
a - se_add_mult.o
a - se_proc_data.o
a - se_BB_unfold.o
a - sxm_examine.o
make[2]: Leaving directory `/rdss/soloii110/editor'
make[2]: Entering directory `/rdss/soloii110/editor'
install libsoloedit.a in /rdss/soloii110/../lib
make[2]: Leaving directory `/rdss/soloii110/editor'
make[2]: Entering directory `/rdss/soloii110/perusal'
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c soloii.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_colors_stuff.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_config_stuff.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_callbacks.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_edit_widgets.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_utils.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_frame_menu.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_param_widgets.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_view_widgets.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_swpfi_widgets.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_exam_widgets.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_links_widget.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_X_stuff.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c solo2.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_clkd.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_basics.c
sp_basics.c: In function ‘solo_return_wwptr’:
sp_basics.c:742: warning: pointer targets in assignment differ in signedness
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_accepts.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_pals.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_perusal.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_xyraster.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_fixme.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_save_frms.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_dorade.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_colors.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sp_lists.c
gcc -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include -c sii_bscan.c
sii_bscan.c: In function ‘sp_ts_data_loop’:
sii_bscan.c:165: warning: pointer targets in assignment differ in signedness
gcc -o soloii -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include soloii.o sii_colors_stuff.o sii_config_stuff.o sii_callbacks.o sii_edit_widgets.o sii_utils.o sii_frame_menu.o sii_param_widgets.o sii_view_widgets.o sii_swpfi_widgets.o sii_exam_widgets.o sii_links_widget.o sii_X_stuff.o solo2.o sp_clkd.o sp_basics.o sp_accepts.o sp_pals.o sii_perusal.o sii_xyraster.o sii_fixme.o sp_save_frms.o sp_dorade.o sp_colors.o sp_lists.o sii_bscan.o /rdss/soloii110/../lib/libsoloedit.a /rdss/soloii110/../lib/libs2.a -lm -lncurses -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -L/opt/gnome/lib -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
gcc: /rdss/soloii110/../lib/libs2.a: No such file or directory
make[2]: *** [soloii] Error 1
make[2]: Leaving directory `/rdss/soloii110/perusal'
make[2]: Entering directory `/rdss/soloii110/perusal'
gcc -o soloii -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include soloii.o sii_colors_stuff.o sii_config_stuff.o sii_callbacks.o sii_edit_widgets.o sii_utils.o sii_frame_menu.o sii_param_widgets.o sii_view_widgets.o sii_swpfi_widgets.o sii_exam_widgets.o sii_links_widget.o sii_X_stuff.o solo2.o sp_clkd.o sp_basics.o sp_accepts.o sp_pals.o sii_perusal.o sii_xyraster.o sii_fixme.o sp_save_frms.o sp_dorade.o sp_colors.o sp_lists.o sii_bscan.o /rdss/soloii110/../lib/libsoloedit.a /rdss/soloii110/../lib/libs2.a -lm -lncurses -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -L/opt/gnome/lib -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
gcc: /rdss/soloii110/../lib/libs2.a: No such file or directory
make[2]: *** [soloii] Error 1
make[2]: Leaving directory `/rdss/soloii110/perusal'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/rdss/soloii110'
make: *** [World] Error 2
linux:/rdss/soloii110 # makeinstall
bash: makeinstall: command not found
linux:/rdss/soloii110 # make install
for d in translate editor perusal; do
(cd $d; make all; make install)
done
make[1]: Entering directory `/rdss/soloii110/translate'
rm -f xltrsii
gcc -g -o xltrsii ddmain.o libs2.a -lm -lncurses
/usr/lib/gcc/i586-suse-linux/4.0.2/../../../../i586-suse-linux/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
make[1]: *** [xltrsii] Error 1
make[1]: Leaving directory `/rdss/soloii110/translate'
make[1]: Entering directory `/rdss/soloii110/translate'
rm -f xltrsii
gcc -g -o xltrsii ddmain.o libs2.a -lm -lncurses
/usr/lib/gcc/i586-suse-linux/4.0.2/../../../../i586-suse-linux/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
make[1]: *** [xltrsii] Error 1
make[1]: Leaving directory `/rdss/soloii110/translate'
make[1]: Entering directory `/rdss/soloii110/editor'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/rdss/soloii110/editor'
make[1]: Entering directory `/rdss/soloii110/editor'
install libsoloedit.a in /rdss/soloii110/../lib
make[1]: Leaving directory `/rdss/soloii110/editor'
make[1]: Entering directory `/rdss/soloii110/perusal'
gcc -o soloii -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include soloii.o sii_colors_stuff.o sii_config_stuff.o sii_callbacks.o sii_edit_widgets.o sii_utils.o sii_frame_menu.o sii_param_widgets.o sii_view_widgets.o sii_swpfi_widgets.o sii_exam_widgets.o sii_links_widget.o sii_X_stuff.o solo2.o sp_clkd.o sp_basics.o sp_accepts.o sp_pals.o sii_perusal.o sii_xyraster.o sii_fixme.o sp_save_frms.o sp_dorade.o sp_colors.o sp_lists.o sii_bscan.o /rdss/soloii110/../lib/libsoloedit.a /rdss/soloii110/../lib/libs2.a -lm -lncurses -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -L/opt/gnome/lib -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
gcc: /rdss/soloii110/../lib/libs2.a: No such file or directory
make[1]: *** [soloii] Error 1
make[1]: Leaving directory `/rdss/soloii110/perusal'
make[1]: Entering directory `/rdss/soloii110/perusal'
gcc -o soloii -g -I./ -I/rdss/soloii110/include -I/usr/local/include/gtk-1.2 -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include -I/usr/X11R6/include soloii.o sii_colors_stuff.o sii_config_stuff.o sii_callbacks.o sii_edit_widgets.o sii_utils.o sii_frame_menu.o sii_param_widgets.o sii_view_widgets.o sii_swpfi_widgets.o sii_exam_widgets.o sii_links_widget.o sii_X_stuff.o solo2.o sp_clkd.o sp_basics.o sp_accepts.o sp_pals.o sii_perusal.o sii_xyraster.o sii_fixme.o sp_save_frms.o sp_dorade.o sp_colors.o sp_lists.o sii_bscan.o /rdss/soloii110/../lib/libsoloedit.a /rdss/soloii110/../lib/libs2.a -lm -lncurses -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -L/opt/gnome/lib -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
gcc: /rdss/soloii110/../lib/libs2.a: No such file or directory
make[1]: *** [soloii] Error 1
make[1]: Leaving directory `/rdss/soloii110/perusal'
make: *** [install] Error 2
linux:/rdss/soloii110 #